Update Samsung Galaxy FIT S5670 with Official Gingerbread DDKT1 2.3.6 Firmware

Seems like after a much wait here comes a huge respite for all the users of Samsung Galaxy FIT S5670 as in the due course of the article we will check out on how to update your device with the stable and official firmware of Gingerbread 2.3.6 dubbed as DDKT1. Please note that this firmware update of Gingerbread 2.3.6 is official update for all the users of INDIA region though can be applied by all the users irrespective of the region you are from. We will soon be coming out with the rooting article too which will enable the users of Galaxy FIT to power up with the custom ROMS. Unfortunately, the Galaxy FIT won’t be receiving the official Ice Cream Sandwich Android 4.0 firmware due to hardware limitations.

Disclaimer: At AndroidSense, we have made sure in all respects that all the information regarding the firmware update is mentioned correctly in this article. We should not be held responsible for any damage happened to your device in the process of updating your phone which is very unlikely if you follow the instructions.

So, let’s directly check out the list of essential pre requisites which you need to follow and then we will move to the procedure on how to apply this in your phone with the help of quick procedure in the next page.
Essential pre Requisites:

• All the data present in your Galaxy FIT needs to be backed up ONLY by following the below mentioned steps so as to ensure that just in case if the data gets lost or corrupted, the same can be restored easily.

Caution (Not for INDIAN users): Don’t backup the data using the KIES as after the update KIES won’t be detecting your phone as its not Official firmware for your region.
Text messages – Use “SMS Backup & Restore app”,
Phone Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Pictures, Music, Videos, Files etc.– Copy to internal / External SD Card,
Internet & MMS Settings – Backup all the settings from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”
Notes – Manually you need to note down or need to transfer to Evernote.

• Charge left in the device should be minimum 60% so as to make sure that the phone doesn’t get turned Off in the middle of firmware update. Enable the USB Debugging in your device from the path “Settings > Applications > Development > USB debugging”.

Procedure to Update Galaxy FIT S5670 with Gingerbread 2.3.6 Firmware:

• Download Gingerbread 2.3.6 Package in your computer after which you need to extract the same. In the process of extraction, you will be prompted to enter the password. Enter the password as “androidadvices.com”.

• Match the extracted files from the below shown screen capture, even if single file is missing then you need to check with the extraction or download process.

• From extracted files, open Odin executable file and turn Off the phone so as to enter the device in the download mode.

• Now, you need to enter the by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. Just in case if the device boots in the normal mode then you will have to again try the process of entering into the download mode.

• After entering the phone in the download mode, connect the device to the computer while keeping the Odin opened. Within a minute, the ID : COM section will turn yellow which will mean that all the drivers have been successfully installed and you are now ready to proceed to the next step.

• Click on the “OPS” option in the Odin to select the below mentioned file, tick on “One Package” option and then select the One Package option as mentioned below.

OPS – BENI_v1.0.ops

One Package – S5670DDKT1_S5670ODDKT1_S5670DDKT1_HOME.tar.md5

• Click on Start and then wait for the device to get restarted. Once the device gets restarted, you will be asked to enter the Google Account credentials. Once you see the home screen in your phone, disconnect the connected phone and turn Off the phone so as to enter the phone in the recovery mode.

• The recovery mode can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.

• Once you finish the above process, you now need to proceed to select “++++ Go Back ++++” and select the option of “Reboot System Now” for restarting the device.

Note: Just in case if you face any issues in the process of firmware update or if the process gets interrupted, you will then have to reapply the whole process of firmware update. Also, don’t forget to restore back the data which you have backed up so that you can easily use all the services like before your phone was in.

• The updated firmware can be checked from the path of Settings > About Phone > Firmware Version where you will find the version of Android OS where it will show DDKT1 2.3.6. Also, if you are unable to access the internet after the firmware update then you will have to re configure the APN Settings which can be done from the path Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names.

So, in this way you have successfully updated your Samsung Galaxy FIT S5670 with the latest version of Gingerbread 2.3.6 firmware. Do let us know just in case if you face any issues in the process of updating as we will try our level best to sort out the same.

Penulis : Rishikesh ~ Sebuah blog yang menyediakan berbagai macam informasi

Artikel Update Samsung Galaxy FIT S5670 with Official Gingerbread DDKT1 2.3.6 Firmware ini dipublish oleh Rishikesh pada hari Saturday 31 March 2012. Semoga artikel ini dapat bermanfaat.Terimakasih atas kunjungan Anda silahkan tinggalkan komentar.sudah ada 0 komentar: di postingan Update Samsung Galaxy FIT S5670 with Official Gingerbread DDKT1 2.3.6 Firmware